The laser brazing process uses a filler metal for joining without actually melting the base material. This process allows you to achieve high precision and minimal warpage on the workpiece with excellent cost effectiveness. The materials that you are working with will determine which solder and which process parameters to select. You can use the ALO1, with its integrated seam tracking ability, for soldering with minimal technical complexity. This model is particularly suitable when working with geometries that offer only limited accessibility.
Brazing is a joining process whereby a non-ferrous filler metal or alloy is heated to melting temperature above 800°F (425°C) and distributed between two or more close-fitting parts by capillary action. At its liquid temperature, the molten filler metal and flux interacts with a thin layer of the base metal, cooling to form an exceptionally strong, sealed joint due to grain structure interaction. Certain metals, such as CuAg (Copper-Silver alloy), have a low temperature eutectic.
Steel & Alloy Industry
Suitable Fume Extractors
|Recommended Fume Extractors|
|LFX 4010 ALF 4020 ALF 4030||ALF 6010 ALF 6020 ALF 6030|
Industrial dusts are of different materials and have different physical and chemical properties. Some are abrasive in nature, some are highly combustible and explosive in nature, some are corrosive, and some are sticky and have high moisture content.
For enquiries or to know more feel free to contact us @ 9789066648 / 044-26580258 or email to firstname.lastname@example.org